Find answers to the most common questions about Fire Safety below. Look through the topics below and select the question to reveal the answer.
Fire safety is a set of procedures which aim to reduce the amount of damage and injuries caused by fires. These include risk assessments to help identify and reduce areas of fire risk and formulate an emergency and evacuation plan in the event that a fire does break out.
Depending on the type of fire, using water to try and extinguish it can make the situation worse. In the event of a fire, its best to use a fire extinguisher which correlates to the type of fire you’re dealing with, but only attempt to do this if your exit is clear.
It is recommended that any business which carries a higher risk of fire than average, such as from storing combustible waste or chemicals on site, has a fire prevention plan to properly protect both the business and the environment from damage.
While it isn’t essential to have firefighting experience to become a fire inspector, the majority of fire inspectors have spend an amount of time as firefighters. Those fire inspectors who don’t have hands on experience usually come from roles which relate to fire safety outside of the traditional fire service.
In order to make a fire evacuation plan, you will first need to conduct a fire risk assessment of your business. Once you have done this, you can decide upon your fire safety strategy, which includes evacuation routes, safe meeting points for staff, and proper procedures for contacting the fire department.
Whenever new staff join the business, you’ll need to ensure they’re trained on your fire safety procedures. In addition to this, if anything changes within your business which adds new risks, you will need to inform all staff of the new fire risks.
Tackling small fires is fine, provided you are cautious and have a clear escape route. If you would need to put yourself in a compromised position, such as having the fire between you and your escape route, then you should not attempt to fight the fire. If you don’t have the right type of fire extinguisher for the fire, or it has started to spread, then do not try to extinguish the fire and prioritise evacuation.
It is legally required for all employees to be trained in basic fire safety when inducted into your business, and should be periodically followed up throughout employment.
Water is typically one of the most straightforward ways of removing heat from a fire, but there are times where this is dangerous. You should never use water on cooking oil fires and metal fires as it will make the situation worse and add further dangers.
Ensure that you have smoke alarms installed throughout your home or business and test them every month in case the batteries are flat. Take care when cooking with oil at home and never leave lit candles unattended. Have a thorough fire safety evacuation plan in case of a large fire and carry out drills regularly. If a fire does occur, make sure you stay outside and call for help until the fire has been completely extinguished.
Three major causes of fires are cooking equipment overheating, faulty electrical wiring or appliances and smoking.
In the event of a fire, you should take the following steps to ensure that everyone is evacuated safely from the building: set off the fire alarm, call 999, help any injured people while exiting the building, ensure everyone is out of the building and secure the site, and stay away from the building until it is safe to return.
Businesses must have a fire emergency and evacuation plan which contains actions on what to do if a fire occurs. All employees must be aware of what this plan is, the evacuation route as per the floor plan, and should give easily understood instructions on what to do.
While there aren’t universal rules around fire safety, there are a number of essential points you should consider. Conducting a fire risk assessment will help you understand areas of risk within your home or business, and how to reduce this risk. Keeping sources of ignition and burnable substances far apart from each other is one of the most important parts of fire safety, as it reduces the risk of a fire starting in the first place.
The three elements that a fire would need to ignite are heat, a fuel source and oxygen.
The three key parts to a fire prevent plan are having establish fire exits for your building, forming a comprehensive emergency and evacuation plan, and keeping fire extinguishers on hand for tackling smaller fires.
The three main causes of fire on healthcare premises are smoking, faulty electrics and cooking appliances.
There are numerous factors which can contribute to how dangerous a fire can grow to be. Grease and cooking oil fires can get out of control quickly and require specific methods to be extinguished which might not be known to everyone, meaning they can present a large amount of danger if improperly dealt with. Chemical fires present similar challenges.
A fire prevention plan is a set of procedures and measures which aim to reduce the risk of fires on-site. Firefighting is a means of tackling fires, whether they are smaller fires which can be extinguished by following specific instructions with specialist equipment, or larger fires which require trained firefighters to tackle with heavy-duty equipment.
A fire safety course is a series of modules delivered by trained individuals or e-learning platforms which aim to raise the awareness of potential causes and risks associated with fires, including how to safely tackle one if it breaks out.
A fire safety training is a course delivered by trained individuals or e-learning platforms which aim to raise the awareness of potential causes and risks associated with fires, including how to safely tackle one if it breaks out.
A Fire Prevention and Fire Fighting (FPFF) course explains the causes of fires, how to minimise the risks of fire and how to safely extinguish them.
The best way to fight a fire is to use the corresponding fire extinguisher which matches the type of fire, e.g. a dry powder extinguisher (blue label) for tackling Class A, B, C and electrical fires.
Fire prevention is a series of steps which can help prevent fires from occurring, while fire protection is the use tools and procedures to minimise the risks in the case of a fire breaking out.
The first thing you should do if a fire breaks out is use the nearest fire alarm and evacuate the building.
Smoke inhalation is the main cause of death associated with fire.
Before using a fire extinguisher, ensure that you can confidently tackle the size of the fire safely. Do not put yourself in a compromised position in order to attempt to fight the fire, and make sure that you have the right fire extinguisher for the type of fire.
Water is a completely oxidised material (H2O), which means that it can’t oxidise any further and acts as a barrier between the fuel source (whatever is burning) and the oxygen source because it won’t ignite, effectively smothering the flames. This principle also applies to using CO2 to extinguish a fire.
Fire safety is an important part of preventing fires and minimising the dangers associated with fire in the event that one does break out.
Yes - smoke and hot gases will spread as the result of a fire, travelling through a building in hot air currents and cause combustible materials to ignite, thus spreading the fire.